Haunted FM-1
Five generative firmwares for the M-VAVE FM-1, each built around one idea: the shape of a song, a voice that almost says something, timing that is never on the grid, harmony as weather, a tape loop that wears out. Install one from this page with the FM-1 on USB (Chrome or Edge), or try it in the browser first. Version 0.1.
Install
Connect the FM-1 by USB, then press Install. The browser asks once to allow MIDI: allow it. Do not unplug while it writes. Connect the cable to the computer directly; no other MIDI software should have the FM-1 open.
Switching between them
Any of the five installs over any other, and over Felucca-family firmware, from this page. Going from M-VAVE's stock firmware works the same way. To go back to the stock firmware, use the section below or M-VAVE's own updater (M-UPGRADE). What a firmware saved on the FM-1 (its loop, its route, its settings) is kept by that firmware only while it is installed; save anything you care about before switching.
Back to the stock firmware
This writes M-VAVE's FM-1 V15 back over the same cable. M-VAVE's server does not allow this page to download it, so you choose the file:
- Download M-VAVE's FM-1 V15: FM-1.fwsc
- Connect the FM-1 by USB and press the button.
An FM-1 that fails to start twice comes up in a safe mode this page can reach. If it does not start at all, felucca-bsp's rescue tool puts the stock firmware back through the chip's own update mode.